User Guide
Table Of Contents
- Contents
- Important Safety Instructions
- Basic Operations
- Copying
- Faxing
- Configuring Initial Settings for Fax Functions
- Sending Faxes
- Receiving Faxes
- Sending and Receiving Faxes According to Your Purposes
- Checking Status and Log for Sent and Received Documents
- Importing/Exporting Address Book Data with the Supplied Software
- Sending Faxes from Your Computer (PC Fax)
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Preparing to Use the Machine as a Scanner
- Scanning from the Machine
- Scanning from a Computer
- Convenient Scanning with a Machine-Based Operation
- Can Be Used Conveniently with a Mobile Device
- Network
- Connecting to a Network
- Viewing Network Settings
- Configuring the Machine for Printing or Faxing from a Computer
- Configuring Scan Settings (E-Mail/Shared Folders)
- Configuring the Machine for Your Network Environment
- Security
- Using Remote UI
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- SIL OPEN FONT LICENSE
● When
you cancel an operation, this error code is displayed, but this is not abnormal. Print, send, or receive
documents again as necessary.
#752
E-mail sending was impossible because an incorrect SMTP server name was set.
● Check the SMTP server name, and corr
ect the setting.
Conguring Basic E-Mail Settings(P
. 359)
Conguring E-Mail Communication Settings
(P. 363)
E-mail sending was impossible because an incorrect domain name was set.
● Check the domain name, and correct the setting.
Conguring DNS(P
. 377)
E-mail sending was impossible because the machine was not connected to a network correctly.
● Check whether the machine is properly installed and correctly connected to the network.
Installation/Settings Problems(P. 566)
#753
Scanned data could not be sent as e-mail or stored in the shared folder because the LAN cable is
disconnected.
● Check whether the LAN cable is connected corr
ectly.
Connecting to a Wired LAN(P. 318)
#755
Scanned data could not be sent as e-mail or stored in the shared folder because TCP/IP was not working
corr
ectly.
● Check <TCP/IP Settings>, and set correctly.
Network Settings (P. 473)
An IP addr
ess is not set.
● Set the IP address correctly.
Setting IP Addresses(P. 336)
The machine cannot communicate with de
vices on a network immediately after the machine starts up
because the waiting time for the start of the communication is set.
● The machine cannot start communicating immediately after it is turned ON. Wait until the set time for
<Waiting Time for Connection at Startup> passes after turning ON the machine, and send again.
Setting a Wait Time for Connecting to a Network(P. 376)
#801
When communicating with an SMTP server to send an e-mail, a timeout error occurred from the server.
Troubleshooting
561