User Guide

Table Of Contents
5
Lower the dust cover.
When Legal size paper is loaded
The paper guides at the r
ear edge of the paper will be extended. Open the dust cover extension, then lower
the dust cover.
6
Pull out the paper stopper to open.
»
Continue to Specifying Paper Size and Type(P. 56)
When changing the paper size or type
The factory default settings for paper size and type are <LTR> and <Plain (16 lb Bond-23 lb Bond)>,
respectively. If you load a different size or type of paper into the machine, make sure to change the settings.
If you do not change the settings, the machine cannot print properly.
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
manual feed slot (
Loading Paper in the Manual Feed Slot(P. 50) ), with the side to print face up (pr
eviously
printed side face down).
Load one sheet at a time per each print.
You can use only the paper printed with this machine.
You cannot print on the side that has previously been printed on.
If you are using A5 paper, the reverse side may not be printed correctly.
LINKS
Paper(P. 649)
Basic Operations
49