User Guide
Table Of Contents
- Contents
- Important Safety Instructions
- Basic Operations
- Copying
- Faxing
- Configuring Initial Settings for Fax Functions
- Sending Faxes
- Receiving Faxes
- Sending and Receiving Faxes According to Your Purposes
- Checking Status and Log for Sent and Received Documents
- Importing/Exporting Address Book Data with the Supplied Software
- Sending Faxes from Your Computer (PC Fax)
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Preparing to Use the Machine as a Scanner
- Scanning from the Machine
- Scanning from a Computer
- Convenient Scanning with a Machine-Based Operation
- Can Be Used Conveniently with a Mobile Device
- Network
- Connecting to a Network
- Viewing Network Settings
- Configuring the Machine for Printing or Faxing from a Computer
- Configuring Scan Settings (E-Mail/Shared Folders)
- Configuring the Machine for Your Network Environment
- Security
- Using Remote UI
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- SIL OPEN FONT LICENSE
Special Processing (P. 524)
Printouts Are Grayish
Is <Correct Density> in <Copy Settings> set too dark?
● Adjust the setting so that density is lighter.
Correct Density(P. 496)
Is the printer installed where it is subject to direct sunlight or strong light?
● Install the printer in an appr
opriate location.
Installation(P. 3)
Relocating the Machine(P. 606)
Was the toner cartridge been left in direct sunlight for a long period of time?
● Stor
e the toner cartridge in an appropriate location for two to three hours, then try printing again. This
may solve the problem. If the problem persists, replace the toner cartridge.
Replacing Toner Cartridges(P. 598)
Cannot Scan a Printed Barcode
Are you trying to scan a barcode printed with factory default settings?
● In the printer driver, specify [Special Settings 1] for the setting of [Special Print Mode].
● When
set to [Special Settings 1], print density is lighter compared with [Off]. Text and lines may also
appear faded.
● White specks may appear in images when this feature is used with paper other than lightweight paper.
Troubleshooting
581