User Manual

[Name for One-touch Speed Dial Number]
Enter the name for identifying the destination to be registered. Set a name that will be easy for you to
nd later in the Address Book.
[Send Destination Settings]
[Destination E-mail Address]
Enter the e-mail address that you want to send your scanned documents to.
[SMTP Server Settings]
[SMTP Server]
Enter the SMTP server name.
[SMTP Authentication]
Click the [Not Set] or [Set] radio button to match the authentication settings of the SMTP server. When
[Set] is selected, enter the user name in the [User Name] text box and password in the [Password] text
box.
Authentication methods for sending e-mails
● To prevent e-mail transmissions by unauthorized users, the machine supports SMTP authentication (SMTP
AUTH) and POP before SMTP. For more information about the required authentication method, contact
your Internet service provider or Network Administrator.
● POP before SMTP authentication can only be congured by using the Remote UI. Conguring E-Mail
Communication Settings(P. 363)
5
Click [Next].
6
Conrm the settings and click [Register].
7
Restart the machine.
● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Additional settings may be required depending on the network you are using. For more information, contact
your Internet service provider or Network Administrator.
● To enable TLS for e-mailing, see Conguring E-Mail Communication Settings(P. 363) .
● To change port numbers, see Changing Port Numbers (P. 409) .
LINKS
Conguring Scan Settings (Sending E-Mail)(P. 358)
Sending Documents as E-Mails Directly from the Machine(P. 246)
Registering in the Address Book(P. 60)
Network
362