User Manual

Making detailed settings (only when registered for fax)

After tapping <Details>, a screen similar to the following is displayed.

If an error occurs in an image that is being sent, the error is checked and corrected to prevent an improper

image from being sent when setting <On>.

If it takes time for transmissions to start, such as when there is a poor telephone connection, you can adjust

the transmission start speed downward incrementally starting from "33600 bps".

Specify <International (1)> to <International (3)> according to the transmission conditions when registering

overseas fax numbers.

You can also make detailed settings for destinations from <Menu> <Fax Settings>. However, settings

made from <Addr. Book> are enabled for the detailed settings of destinations registered in the Address

Book.

Tap <Apply>.

● A three-digit number is automatically set to destinations. The number can be edited after it has been

registered.

◼ Editing the Content of Registered Destinations

After registering destinations, you can change the content of registered information. For example, you can change the

fax number or name of a registered destination, change the type from fax number to e-mail, change the coded dial

number, and so on.

Press and tap <Addr. Book>.

Basic Operations