User's Manual

● Y
ou need to connect your answering machine to the machine beforehand.
● Set the answering machine to answer after a few rings.
● We recommend that you add approximately 4 seconds of silence at the beginning of the
message or set the maximum recording time to 20 seconds.
<DRPD: Select Fax>
If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your
telephone company
, this receiving mode is available. This service assigns two or more
telephone numbers with distinctive ring patterns to a single telephone line. You can use one of
these numbers for faxes and one for telephone calls.
When the machine receives a call, it automatically recognizes the ring pattern and your
telephone rings differently depending on whether the call is a fax or telephone call. If the ring
pattern is for a fax, the machine automatically receives the fax.
● For mor
e information about this service, contact your telephone company.
● You need to connect your telephone to the machine beforehand.
● Depending on the type of telephone connected to it, the machine may not be able to send or r
eceive faxes
properly.
● If you are connecting an external telephone with fax functions, set the telephone to not receive faxes
automatically.
● If you pick up the telephone handset and hear a beep, the call is a fax. You can receive the fax just by using
the telephone to enter a specic ID number.
Using a Telephone to Receive Faxes (Remote Reception)(P. 144)
◼ Setting Up the Machine to Receive Fax
es
1
Press
and tap <Fax>.
2
Tap <RX Mode>.
3
Select the receiving method.
Faxing
143