User's Manual

Table Of Contents
Enter the name and the installation location information to help you identify this machine when operating
your Apple de
vice. This information is useful if you have more than one AirPrint printer. Also select whether
to give priority to print speed or to print quality.
If you select the [Use AirPrint] check box
The follo
wing items are also set to <On> automatically.
<mDNS Settings> for IPv4 and IPv6
Conguring DNS(P
. 377)
<Use HTTP>
Disabling HTTP Communication (P. 422)
[Use
IPP Printing] under [IPP Print Settings]
Changing the Setting of Functions Available with
AirPrint
(P. 297)
<Use Network Link Scan>
Changing the Setting of Functions Available with AirPrint(P. 297)
If you change [Printer Name]
If
you change [Printer Name] that you have once specied, you may be unable to print any more from the
Mac that has been able to be used for printing so far. This phenomenon occurs because <mDNS Name>
(
Conguring
DNS(P. 377) ) of IPv4 is also changed automatically. In this case, add the machine to the
Mac again.
Changing the Setting of Functions Available with AirPrint
If you want to disable functions that you are not going to use with AirPrint or encrypt communications, congure the
necessary setting using the operation panel or Remote UI.
Changing Print and Fax Settings
To perform printing or fax sending with AirPrint, IPP protocol is used.
Turning the function On/Off
Y
ou can specify whether to perform printing and fax sending with AirPrint. The factory default setting is [On].
Log on to the Remote UI in System Manager Mode ( Starting Remote
UI(P
. 449) )
[Settings/Registration] [Network Settings] [TCP/IP Settings] [IPP Print
Settings] [Edit] Clear or select the [Use IPP Printing] check box [OK]
Changing the TLS setting
Y
ou can specify whether to encrypt communications using TLS when performing printing or sending faxes with
AirPrint. The factory default setting is [On].
When the machine is connected to a Mac via USB
, set [Use TLS] to [Off].
Log on to the Remote UI in System Manager Mode ( Starting Remote
UI(P
. 449) )
[Settings/Registration] [Network Settings] [TCP/IP Settings] [IPP Print
Settings] [Edit] Clear or select the [Use TLS] check box [OK]
Can Be Used Conveniently with a Mobile Device
297