User's Manual

Enter up to 24 alphanumeric characters for naming the key pair. Set a name that will be easy for you to
nd later in a list.
[Signatur
e Algorithm]
Select the signature algorithm from the drop-down list.
[Key Algorithm]
RSA is used for generating a key pair. Select the key length from the drop-down list. The larger the
number for the key length, the slower the communication. However, the security is tighter.
● [512-bit] cannot be selected for the k
ey length, if [SHA384] or [SHA512] is selected for [Signature
Algorithm].
[Certicate Settings]
[V
alidity Start Date (YYYY/MM/DD)]
Enter the validity start date of the certicate in the range between 01/01/2000 and 12/31/2099, in the
order of: year, month, day.
[Validity End Date (YYYY/MM/DD)]
Enter the validity end date of the certicate in the range between 01/01/2000 and 12/31/2099, in the
order of: year, month, day. A date earlier than [Validity Start Date (YYYY/MM/DD)] cannot be set.
[Country/Region]
Click the [Select Country/Region] radio button and select the country/region from the drop-down list.
You can also click the [Enter Internet Country Code] radio button and enter a country code, such as "US"
for the United States.
[State]/[City]
Enter up to 24 alphanumeric characters for the location as necessary.
[Organization]/[Organization Unit]
Enter up to 24 alphanumeric characters for the organization name as necessary.
[Common Name]
Enter up to 48 alphanumeric characters for the common name of the certicate as necessary. "Common
Name" is often abbreviated as "CN."
7
Click [OK].
● Ke
ys for network communication may take approximately 10 to 15 minutes to generate.
● After a key pair is generated, it is automatically registered to the machine.
Generate Key and Certicate Signing Request (CSR)
1
Start the Remote UI and log on in System Manager Mode.
Starting Remote UI(P. 449)
2
Click [Settings/Registration].
Security
437