User Manual

143
Playback
IMPORTANT
• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not remove the power source or turn off the camera.
- Do not open the card slot cover of the card being accessed and do not remove the card.
Adjusting the Volume
You can connect headphones to the
× (headphone) terminal to listen to the audio during playback. Adjust the
headphone volume with the [Audio Setup] > [Headphone Volume] setting. If you set an
assignable button to [Headphones +] or [Headphones –] (A 127), you can press the button to adjust the
headphone volume without using the menu.
The audio signal will also be output from the SDI OUT terminals, MON. terminals and HDMI OUT terminal.
NOTES
• For details on changing the audio channel, refer to Audio Output (A 159).
Viewing Photos
After selecting photos as the format to play back, use the SELECT dial to
browse through your photos.
From the PLAY screen:
1 Select [SD Card (Photos)] as the media/format to play back
(A 142).
• The last recorded photo on the SD card will appear on the
monitoring screen and the details of the image file will appear on the
PLAY screen (the file name will be highlighted with an orange frame).
2 Turn the SELECT dial to display other photos.
IMPORTANT
• Observe the following precautions while the SD card access indicator is illuminated in red. Failure to do so may
result in permanent data loss.
- Do not remove the power source or turn off the camera.
- Do not remove the SD card.
NOTES
• The following photos may not be displayed correctly.
- Photos not recorded with this camera.
- Image files that were created, edited or renamed using a computer.