User Manual

Clip/Photo Operations
146
1 Recording date and time
2 Clip file name (A 62)
3 Bit rate and compression (A 66)
4 Frame rate* (A 65)
5 Clip geotagged with GPS information** (A 120, 178)
6 Relay clip** (A 52)
5 indicates the first part of the recording, 6 indicates
the middle part(s) and
7 indicates the last part.
7 Start time code
8 Clip duration
9 Embedded custom picture file** (A 133)
10 Custom picture file’s main settings (A 134)
11 Custom picture file’s detailed settings (A 135)
12 Lens information**
13 User memo information** (A 118)
14 Resolution (A 65)
15 Color sampling (A 65)
16 Custom picture file embedded
17
$ mark**/ % mark** (A 117, 146)
18 End time code
19 Preset color setting (A 84)
* For XF-AVC clips recorded using slow & fast motion recording, [S&F
REC] and both the shooting frame rate and the playback frame rate
will be displayed.
** Only for XF-AVC clips.
Adding and Deleting $ Marks or % Marks
You can add an OK mark ( $ ) or check mark ( % ) to XF-AVC clips recorded on the CFast card in order to tag
them as special clips. Since clips with an $ mark cannot be deleted with the camera, you can use this mark
also to protect important clips.
1 Select the desired clip (A 142).
• Select [CFast (XF-AVC)] as the playback media/format.
2 Add the clip mark ( $ or % mark).
[OPTIONS] > [Add $ Mark] or [Add % Mark] > [OK]
• Alternatively, you can press an assignable button set to [Add
$ Mark] or [Add % Mark] (A 127).
•[
$ Mark] or [ % Mark] will appear briefly on the monitoring screen and the selected clip mark will be added
to the clip. On the control display, $ or % will appear with the clip details on the PLAY screen.
3 When the confirmation screen appears, press [OK].
NOTES
• A clip cannot have both an $ mark and % mark at the same time. When you add a % mark to a clip with an
$ mark, the $ mark will be deleted. Similarly, when you add an $ mark to a clip with a % mark, the %
mark will be deleted.
14
15
19
16
17
1
2
3
5
7
6
8
9
4
11
10
12
13
18