User Manual

159

Audio Output

The camera can output audio from the SDI OUT terminals, MON. terminals, HDMI OUT teminal or

(headphone) terminal. The audio signal recorded with main recording clips recorded in the camera is 4-channel

linear PCM audio, 24 bit. The number of audio channels output and the audio bit depth depend on the terminal

used and other settings.

• SDI OUT terminals: During RAW video output: 2 channels*, 16 bit

During 2K output: 4 channels, 24 bit

• MON. terminals: 4 channels, 24 bit

• HDMI OUT terminal: 2 channels*, 16 bit

•

(headphone) terminal: 2 channels*

* You can select which two channels of the four audio channels recorded will be output from the terminal.

1 Open the audio channel selection screen/submenu for the desired terminal.

Setup screen: [AUDIO] > [MONITOR] or

[AUDIO] > [OPTIONS] > [Audio Output] > [HDMI Channels] or [RAW (SDI)

Channels]

Monitoring menu: [Audio Setup] (

) > [Audio Output] > [Monitor Channels], [HDMI Channels] or

[RAW (SDI) Channels]

In playback mode: [Audio Setup] > [Monitor Channels] or [HDMI Channels]

• [MONITOR]/[Monitor Channels]: audio from the

(headphone) terminal; [HDMI Channels]: audio output

from the HDMI OUT terminal; [RAW (SDI) Channels]: audio output from the SDI OUT terminals during RAW

video output.

• Alternatively, you can press an assignable button set to [Monitor Channels] (A 127) to cycle among the

audio channel output options for the headphone terminal only.

2 Select the desired option and then press SET.

• The options show combinations of audio channels output from the left and right, respectively (L/R). For the

headphones output, options with a “+” sign (for example “CH1+2”) indicate a mix of two audio channels

output from the same side.

• The audio channels selected for output from the

(headphone) terminal will appear at the right of the

monitoring screen, under the audio level indicators (in shooting mode, only if [Monitoring Setup]

> [Custom Display 2] > [Audio Lvl Indicator] is set to [On]).