User Manual

197
Setup Screens and Menu Options
[REC Button]
[Control Display Side], [Front],
[Media Slot Side], [Grip SG-1],
[Remote OU-700]
[Disable], [Enable]
Independently enables or disables the use of individual REC buttons on the camera (on the left side
next to the control display, on the front, or on the right side next to the card slots), or on an optional
SG-1 Shoulder Style Grip Unit or optional OU-700 Remote Operation Unit attached to the camera.
[LED]
[Button Illumination]
[Camera/EVF-V70],
[Remote OU-700]
[High], [Low], [Off]
[Tally Lamp]
[Camera], [Remote OU-700] [On], [Off]
[Media Access], [LAN (Ethernet)] [On], [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Button Illumination]: Controls the illumination of physical buttons on the camera or on an optional
OU-700 Remote Operation Unit connected to the camera. Buttons that illuminate when you select
an option other than [Off] are indicated in the
Names of Parts (A 13).
[Tally Lamp]: The tally lamp on the camera or on an optional OU-700 Remote Operation Unit
connected to the camera. Note that regardless of this setting, when the camera is turned off, the
tally lamps will illuminate in red momentarily after the Q button is pressed.
[Media Access]: The CFast card access indicators and SD card access indicator when the camera is
accessing the respective recording media.
[LAN (Ethernet)]: The (Ethernet) indicator when the camera is accessing a wired network.
[Fan] (A 63)
[Mode] [Automatic], [Always On]
[Fan Speed (STBY)] [Maximum], [High], [Middle], [Low]
[Fan Speed (REC)],
[Fan Speed (Always)]
[High], [Middle], [Low]
[Fan Speed] [High], [Middle], [Low]
[Low Power Warning] (A 27)
[Battery (%)] 1% to 10% (5%)
[Battery (V)], [DC IN (V)] 12.0 V to 15.0 V in 0.1 V intervals (13.0 V)
[Rec Operation Beep] [Start and Stop], [Stop Only], [Start Only], [Off]
[Scan Reverse Rec]
[Setting] [Both], [Vertical], [Horizontal], [Off]
Inverts the recorded image horizontally and/or vertically. Not available during RAW video recording/
output.
[3D Rec Mode] [On], [Off]
When using another C700 / C700 PL / C700 GS PL camera to shoot in 3D, this function corrects any
lags in the video and audio signals output from the SDI OUT or MON. terminals.
[Level Sensitivity] [x16], [x8], [x4], [x2], [Standard]
Adjusts the sensitivity of the camera's level (electronic horizon).
[Network Settings]*
[Browser Remote] (A 168)
[Display Info] –
[Activate] [On], [Off]
[Connection Method] [Camera Access Point], [Ethernet]
[SSID] Network name up to 32 characters ([C700-xxxx-xx_Canon0C])
Submenu levels / Menu items Setting options and additional information