User Manual

199
Setup Screens and Menu Options
[FTP Transfer] These settings are available only when the menu is opened from the PLAY screen
(A 143).
(A 183)
[Activate] [On], [Off]
[Connection Method] [Ethernet], [Infrastructure]
[Wi-Fi Setup Method] [WPS: Button], [WPS: PIN Code], [Search for Access Points]
[SSID] Network name up to 32 characters
[Authn/Encr Method] [WPA, WPA2-PSK / TKIP, AES], [Open/No encryption], [Open/WEP 1] to [Open/WEP 4],
[Shared Key/WEP 1] to [Shared Key/WEP 4]
[Password] –
[IP Address Assign.] [Automatic], [Manual]
[IP Address],
[Subnet Mask],
[Default Gateway],
[Primary DNS Server],
[Secndry DNS Server]
0.0.0.0 to 255.255.255.255 ([0.0.0.0])
[FTP Server] Server name up to 32 characters
[FTP: User Name] User name up to 32 characters
[FTP: Password] Password up to 32 characters
[Destination Folder] Destination folder’s path up to 152 characters (Default is the root folder [/])
[Port No.] 1 to 65535 ([21])
[Passive Mode] [On], [Off]
[New Folder by Date] [On], [Off]
[Same Named Files] [Skip], [Overwrite]
[Check MAC Address] –
[GPS] These settings are available only when the optional GP-E1 GPS Receiver is attached to
the camera.
(A 120)
[Activate], [Auto Time Setting] [On], [Off]
[Display Info] –
Displays a screen where you can check the data received from the GPS signal (latitude, longitude,
altitude, UTC data) as well as an indication of the satellite signal’s strength.
[Retract Lens] [On], [Off]
When one of the following lenses is attached to the camera and the focus mode switch on the lens is
set to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.
• EF 40mm f/2.8 STM • EF-S 24mm f/2.8 STM • EF 50mm f/1.8 STM
[Reset Hour Meter] –
The camera has two “hour meters” – the first keeps track of total operation time and the second
keeps track of operation time since the last time the second hour meter was reset with this function.
[Certification Logos]*** –
Displays certification logos that apply to this camera on the control display.
[Firmware]
[Camera], [Remote OU-700] –
Displays the current firmware version of the camera or updates the firmware version of an optional
OU-700 Remote Operation Unit. These settings are usually unavailable.
[Lens] – (A 45)
Submenu levels / Menu items Setting options and additional information