User Manual

Specifications
222
LUT (BT.709, BT.2020, DCI, ACESproxy, HDR-PQ (OOTF On or Off), HDR-HLG, User LUT 1 to 4) and
supplemental displays* (superimposed onscreen displays, peaking, zebra pattern, magnification, B&W image,
waveform monitor, false color display, anamorphic desqueeze) can also be output.
* MON. terminals only.
HDMI OUT Terminal
HDMI connector, output only
LUT (BT.709, BT.2020, DCI, ACESproxy, HDR-PQ (OOTF On or Off), HDR-HLG, User LUT 1 to 4) and
supplemental displays (superimposed onscreen displays, peaking, zebra pattern, magnification, B&W image,
waveform monitor, false color display, anamorphic desqueeze) can also be output.
•VIDEO Terminal
Proprietary connector for the optional EVF-V70 OLED Electronic Viewfinder, output only
LUT (BT.709, HDR (1600% or 400%; OOTF On or Off), User LUT 1 to 4) and supplemental displays
(superimposed onscreen displays, peaking, zebra pattern, magnification, B&W image, waveform monitor, false
color display, anamorphic desqueeze) can also be output.
INPUT Terminals (INPUT 1 and INPUT 2)
XLR 3-pin jack (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced
Analog Inputs
Sensitivity:
MIC setting: –60 dBu (volume center, full scale –18 dB) / 600
LINE setting: 4 dBu (volume center, full scale –18 dB) / 10 k
Microphone attenuator: 20 dB
Digital Inputs (AES/EBU)
AES3 standard (48 kHz, 24 bit, 2ch) / 110
•MIC Terminal
3.5 mm stereo mini-jack, –72 dBV (volume center, full scale –18 dB) / 1.2 k
Microphone attenuator: 20 dB
×
(Headphone) Terminal
3.5 mm stereo mini-jack, –G to –8 dBV (16 load, volume range Min to Max) / 50 or less
GENLOCK/SYNC OUT Terminal
BNC jack, 1.0 Vp-p / 75
GENLOCK setting: input only; SYNC OUT setting: output only, tri-level HD signal
TIME CODE IN/OUT Terminal
BNC jack, input/output
Input setting: 0.5 Vp-p to 18 Vp-p / 100 k;Output setting: 1.3 Vp-p / 50 or less
REMOTE A Terminal, REMOTE B Terminal
REMOTE A: 2.5 mm stereo sub-mini jack
REMOTE B: Circular 8-pin jack (for the optional RC-V100 Remote Controller, RS-422 interface)
CTRL Terminal
LEMO circular 7-pin jack (for the optional OU-700 Remote Operation Unit)
(Ethernet) Terminal
Ethernet, 1000BASE-T compatible
LENS Terminal
Circular 12-pin jack (12-pin serial interface)
System Extension Terminal
Proprietary connector for optional accessories