User Manual

Preparing the Main Power Supply

Using the DC IN 12V Terminal

1Press the

button to turn off the camera.

2 Connect the 4-pin XLR connector of the external power

supply to the camera’s DC IN 12V terminal.

IMPORTANT

• Make sure to turn off the camera before connecting or

disconnecting an external power source to/from the

camera’s DC IN 12V terminal.

Checking the Camera’s Power Levels

You can check the voltage level of the power source used on the camera’s HOME screen and on the shooting

screen that appears on monitoring devices (A 57, 59).

You can use the [System Setup] > [Low Power Warning] settings to set a critical power level

independently for the DC IN 12V terminal and battery. When the power input to the camera reaches the

predetermined level, the onscreen power indicator will change to red and a message will appear in the

[LIVE] screen. When using a battery compatible with BMS (battery management system), you can even set the

warning level as a percentage of the remaining battery charge instead of voltage.

햳

햲