User Manual
Preparing the Camera
46
IMPORTANT
• Be sure to observe the following precautions while the lens firmware is being updated. Failing to do so can
cause malfunctions.
- Do not remove the power source or turn off the camera.
- Do not remove the lens.
- Do not operate any buttons or controls on the camera.
- Do not open the SD card slot cover and do not remove the SD card.
NOTES
• We recommend that you power the camera from a power outlet using an AC adapter or use a sufficiently
charged battery.
• When using an optional EF extender, remove the extender before performing the procedure.
[]
Attaching a PL Lens
1 Press the
Q
button to turn off the camera.
2 Hold a bayonet ring handle and turn the bayonet ring
counter-clockwise to remove the body cap and remove any
dust caps from the lens.
3 Attach the lens to the camera aligning a groove on the lens
with the PL lens index pin on the mount.
4 Turn the bayonet ring clockwise to fix the lens in place.
Only when using a lens with a 12-pin camera interface cable:
5 Connect the lens’s 12-pin cable to the camera’s LENS
terminal.
• This allows the camera to power the lens’s drive unit.
6 Press the
Q
button to turn on the camera.
7 If necessary, change the lens’s settings to allow control
from the camera.
• For details, refer to the instruction manual of the lens
used.
NOTES
• When a B4 lens is attached to the camera (using the optional MO-4E or MO-4P B4 Mount Adapter)
- Set [Camera Setup] > [Sensor Mode] to [Super 16mm (Cropped)]. Next, set [Camera
Setup] > [Mount Adapter] to [MO-4E] (
Z
) or [MO-4P] (
[]
).
- If you connect the lens’s 12-pin camera interface cable to the camera’s LENS terminal, you will be able to
zoom and use the push auto iris function from the camera.
- When using a B4 lens compatible with the L.C.A.C. (automatic lens chromatic aberration correction)
function, if the 12-pin interface cable is connected to the camera, the lens’s chromatic aberration can be
corrected. In such case, will appear at the left of the monitoring screen.
햴
햳
햵
PL lens index pin
햶