Quick Start Guide

Step 2: Preparing the Camcorder

English

Step 2: Preparing the Camcorder

Attaching the Lens Hood

Attach the lens hood to protect the lens and reduce the amount of stray light that may hit

the lens.

Place the lens hood on the front of the lens so

that the hood’s lens mount index covers the

index on the lens

(햲) and turn it 90 degrees

clockwise until it clicks

(햳).

• Be careful not to deform the lens hood.

• Make sure that the lens hood is aligned with the

thread.

Attaching the MA-400 Microphone Adapter

By attaching the microphone adapter to the camcorder, you can use the INPUT terminals

to record audio from commercially available microphones or analog line in sources with an

XLR connector. The microphone adapter is powered by the camcorder’s power supply.

1 Attach the supplied cable clamp to the

attachment base at the back of the

microphone adapter (햲) and tighten the lock

screw (햳).

2Insert the attachment base at the bottom of

the microphone adapter (햴) to the

camcorder’s accessory shoe and tighten the

lock screw (햵).

햲

햳

햲

햳

햵

햴