User Manual

White Balance
70
Menus
Table of Contents Index
• Using a custom white balance may provide better results in the following cases:
- Changing lighting conditions
-Close-ups
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps, certain types of fluorescent lights and LED lights
• Depending on the type of fluorescent light, optimal color balance may not be obtained with [¿ Fluorescent]
or [ Fluorescent H]. If the color looks unnatural, select [ Automatic] or a custom white balance setting.
Remote Operation Using Browser Remote
After completing the necessary preparations (A 131), you can change the white balance option remotely from a
connected device using the Browser Remote application. In this procedure, depending on the network device,
you may need to click the Browser Remote onscreen button instead of touching it.
1 Touch the white balance button on the Browser Remote screen.
To set automatic white balance ( )
2Touch [ ].
• The selected option will be displayed on the Browser Remote screen and
applied on the camcorder.
To set a preset white balance option
2 Touch the desired option.
• If you selected [È], continue to the next step to set the color temperature.
Otherwise, the selected option will be displayed on the Browser Remote
screen and applied to the camcorder; you do not need to perform the rest of
the procedure.
3 Touch [5500K] and then selected the desired value from the list.
• The selected value will be displayed on the Browser Remote screen and
applied on the camcorder.
To set custom white balance ([ ] and [ ])
2 Point the camcorder at a gray card or white object so it fills the whole screen.
3 Touch [ ] or [ ].
4Touch [Å].
• During the procedure, [ ] or [ ] will flash quickly. When it stops flashing, the procedure is completed and
the setting will be applied on the camcorder.
햲
햳