User Manual

Connecting to an External Monitor or Recorder
156
Applying a User LUT to Video Outputs
Once you create a LUT file (.cube file extension) with Blackmagic Design's DaVinci Resolve, you can use an SD
card to register it in the camera as a user LUT and then apply it to some video outputs in a similar way to the
preset LUTs. You are able to register up to 4 user LUTs. You can rename user LUTs in the camera and perform
other operations on them.
When [Gamma] is set to one of the Canon Log settings, you can apply the user LUT to video output from the
VIDEO terminal (optional viewfinder), SDI OUT terminals, MON. terminals or HDMI OUT terminal. Note that you
cannot apply the user LUT to sub recording (XF-AVC Proxy) clips.
Registering a User LUT
1 Insert the SD card containing the LUT file (.cube file extension) created in Blackmagic Design’s DaVinci
Resolve into the camera’s SD card slot.
2 Open the [Register] submenu.
HOME screen: [COLOR] > [USER LUT] > [Register]
Monitoring menu: [Monitoring Setup] > [LUT] > [User LUT] > [Register]
3 Turn the SELECT dial to select a slot in the camera (user LUT 1 to 4) to which the LUT file will be saved and
then press SET.
4 Select the desired LUT file on the SD card and then press SET.
5 Select the desired color space for output and then press SET.
• Available options are [BT.709 Gamut] and [BT.2020 Gamut]. To leave the color space unconverted, select
[Do Not Convert].
6 Select the desired video range and then press SET.
• Available options are [Narrow Range] and [Full Range].
7 Press both [LOAD] buttons simultaneously (HOME screen) or select [OK] and then press SET (monitoring
menu).
• The selected LUT file will be registered in the camera.
8 Press [OK] (HOME screen) or press SET (monitoring menu).
Applying a User LUT to Video Outputs
1 Open the [LUT] submenu.
HOME screen: [COLOR] > [LUT]
Monitoring menu: [Monitoring Setup] > [LUT]
2 Select the desired terminal and then press SET.
3 Select the desired user LUT (user LUT 1 to 4) and then press SET.
• Only registered user LUTs are displayed.
• The user LUTs are displayed with a  icon in front.
Selecting the Color Space Conversion
You can select the color space conversion for user LUTs registered in the camera.
1 Open the [Color Space (Output)] submenu.
HOME screen: [COLOR] > [USER LUT] > [Color Space (Output)]
Monitoring menu: [Monitoring Setup] > [LUT] > [User LUT] > [Color Space (Output)]
2 Turn the SELECT dial to select the desired user LUT (user LUT 1 to 4) and then press SET.
3 Select the desired color space for output and then press SET.