User Manual

Connecting to a Wired (Ethernet) Network
166
Connecting to a Wired (Ethernet) Network
Connect the camera to a router or other device connected to a wired (Ethernet) network using a commercially
available Ethernet cable. Use Category 5e, shielded twisted pair (STP) Ethernet cables compatible with Gigabit
Ethernet (1000BASE-T) and with good shielding capability.
1 Connect a commercially available Ethernet cable to the (Ethernet) terminal on the camera and an
Ethernet port on a network device.
2 Open the [Connection Method] submenu of the desired network function.
Setup screen: [NETWORK] > Desired function* > [OPTIONS] > [Connection Method]
Monitoring menu: [System Setup] (
B ) > [Network Settings] > Desired function** > [Connection
Method]
* The camera will switch automatically to playback mode when you select [FTP Transfer].
** [FTP Transfer] from the playback screen only.
3 Select [Ethernet] and then press SET.
(Ethernet) access
indicator
Ethernet cable
(commercially available)
Ethernet port on a
network device