User Guide
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Placing Originals
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Increasing the Security of Documents
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Check whether the machine is turned ON.
● If the machine is turned ON, turn it OFF
, and then turn it back ON.
Check the installation site of the machine and the wireless router.
● Is the machine too far fr
om the wireless router?
● Are there any obstacles such as walls between the machine and the wireless router?
● Are there any appliances such as microwave ovens or digital cordless phones that
emit radio waves near the machine?
Perform one of the following settings again.
Setting Up Connection Using WPS Push Button Mode(P. 19)
Setting Up Connection Using WPS PIN Code Mode(P. 21)
Setting Up Connection by Selecting a Wireless Router(P. 23)
Setting Up Connection by Specifying Detailed Settings(P. 26)
When you need to manually set up the connection
If the wir
eless router is set as described below, manually enter all the required information for the wireless LAN
connection (
Setting Up Connection by Specifying Detailed Settings(P. 26) ).
● ANY connection r
efusal
*
is activated.
● The WEP key that was automatically generated (hexadecimal) is selected.
● The stealth mode is activated.
*
A function in which the wir
eless router refuses the connection if the SSID on the device to be connected is set to "ANY"
or is blank.
When you need to change the settings of the wireless router
If the wir
eless router is set as described below, change the settings of the router.
● The MAC address packet ltering is set.
● When only IEEE 802.11n is used for the wireless communication, WEP is selected or the WPA/WPA2
encryption method is set to TKIP.
Troubleshooting
619