User Guide
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Placing Originals
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Increasing the Security of Documents
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Are white areas lightly colored?
● Change the setting of <Pr
event Fogging>. Setting to <On> may solve the problem.
<Prevent Fogging>(P. 479)
● If you set to <On>, print density may be lighter.
White Spots Appear
Ar
e you using paper that has absorbed moisture?
● Replace with appropriate paper.
Loading Paper(P. 139)
Ar
e you using appropriate paper?
● Check usable paper, and replace with appropriate paper.
Available Paper(P. 701)
Loading Paper(P. 139)
Is the amount remaining in toner cartridge running low?
● Check
how much the amount remaining in toner cartridges is left, and replace the toner cartridges as
necessary.
Replacing the Toner Cartridge(P. 585)
Is it time to r
eplace the toner cartridge?
● Materials inside the toner cartridge may have deteriorated. Replace the toner cartridge.
Replacing the Toner Cartridge(P. 585)
When performing 2-sided printing, does void occur in the leading edge of
paper? (MF735Cdw / MF733Cdw / MF731Cdw)
● When
performing 2-sided printing on thin paper, void may occur on the back side of paper in the leading
edge. Setting <Corr. Void on Paper Back Side> to <On> may solve the problem.
<Corr. Void on Paper Back Side>(P. 478)
Troubleshooting
636