User Guide
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Placing Originals
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Increasing the Security of Documents
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Could not detect any connections from wireless devices.
Mobile device detection was not possible within the predetermined length of time.
● Connect again paying attention to the time limit.
Connecting Directly (Access Point Mode)(P. 328)
Could not perform cleaning.
Paper jammed during cleaning.
● Remo
ve the jammed paper, set paper correctly, and perform cleaning again.
Clearing Paper Jams(P. 668)
Cleaning the Feeder(P. 580)
Cleaning the Fixing Assembly(P. 583)
The amount r
emaining in toner cartridges required for cleaning the xing assembly is insucient.
● Cleaning requires sucient toner cartridge remaining. Replace the toner cartridge, and perform the
cleaning again.
Procedure for Replacing the Toner Cartridge(P. 586)
Could not perform correction.
Appropriate paper that is required for correction is not loaded in a paper drawer.
● Load the paper matching the paper specication displayed on the scr
een into the paper drawer.
Full Adjust(P. 594)
Adjust Copy Image(P. 596)
An adjustment image that is r
equired for correction is not placed on the platen glass correctly.
● Place the adjustment image on the platen glass with the print side face down and the black stripe toward
the back side of the machine.
Full Adjust(P. 594)
Adjust Copy Image(P. 596)
Paper jammed during corr
ection.
● Remove the jammed paper, and perform correction again.
Clearing Paper Jams(P. 668)
The amount r
emaining in toner cartridges required for correction is insucient.
● Corrections require sucient toner cartridge remaining. Replace the toner cartridge, and perform
correction again.
Procedure for Replacing the Toner Cartridge(P. 586)
The tr
ansfer belt inside the machine is dirty.
● Perform automatic cleaning of the transfer belt.
Cleaning the Transfer Belt (ITB)(P. 584)
Troubleshooting
649