Owner's Manual

106
Printing
7
Terminate the connection.
 Press the <M> button to return to
the screen in step 1.
 Press the <M> button again to
display the confirmation dialog.
Select [OK], then press <0> to
terminate the connection.
 The [Wi-Fi function] screen will
reappear.
 While connected to a printer, a picture cannot be taken even if the
camera’s shutter button is pressed.
 Movies cannot be printed.
 Before printing, be sure to set the paper size.
 Certain printers may not imprint the file number.
 If [Bordered] is set, certain printers may imprint the date on the border.
 Depending on the printer, the date may appear faint if it is imprinted on a
bright background or on the border.
 RAW images cannot be printed by selecting [Print order]. When printing,
select [Print image] and print.
 When you use a battery to power the camera, make sure it is fully
charged.
 Depending on the image’s file size and image-recording quality, it may
take some time to start printing after you select [Print].
 To stop printing, press <0> while [Stop] is displayed, then select [OK].
 When printing with [Print order], if you stopped printing and want to
resume printing of the remaining images, select [Resume]. Note that
printing will not resume if any of the following occurs.
• You changed the print order or erased any of the print ordered images
before resuming printing.
• When index is set, you changed the paper setting before resuming
printing.
• The card’s remaining capacity was low when you paused printing.
 If a problem occurs during printing, see page 112.