User Manual
Table Of Contents
- Cover
- Camera Instruction Manual
- Introduction
- Getting Started and Basic Camera Operations
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Shooting Operations
- Quick Control for Shooting Functions
- Menu Operations
- Operating the Camera with Touch Screen
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- INFO. Button Functions
- Setting Multi Function Lock
- Help
- Basic Shooting
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the Dual Pixel RAW Function
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations due to Optical Characteristics
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Advanced Operations for Photographic Effects
- Program AE
- Shutter-Priority AE
- Aperture-Priority AE
- Manual Exposure
- Selecting the Metering Mode
- Setting the Desired Exposure Compensation
- Auto Exposure Bracketing (AEB)
- Lock the Exposure for Shooting (AE Lock)
- Long (Bulb) Exposures
- HDR (High Dynamic Range) Shooting
- Multiple Exposures
- Mirror Lockup
- Using the Eyepiece Cover
- Using a Remote Switch
- Remote Control Shooting
- Interval Timer Shooting
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Comparing Images (Two-Image Display)
- Playing Back with the Touch Screen
- Rotating the Image
- Protecting Images
- Setting Ratings
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Downloading Images to a Computer / Software
- Wi-Fi (Wireless Communication) Function Basic Instruction Manual
505
7 Custom ControlsN
When you press the button assigned to this function, you can lock the
exposure (AE lock). The AE lock will be maintained until you press the
button again. Useful when you want to set the focus and meter
separately or take multiple shots at the same exposure setting.
When you press the button assigned to this function, you can lock the
exposure (AE lock) and the AF will stop. Useful with AI Servo AF if you
want to perform AE lock at the same time when AF stops.
For flash photography, pressing the button assigned to this function will
fire a preflash and record the required flash output (FE lock).
You can set the ISO speed by holding down <0> and turning the
<6> dial (for still photo shooting only). If this control is used with ISO
Auto set, you can set the ISO speed manually. When the metering timer
(0) ends, ISO Auto will be restored. If you use this function in the
<a> mode, you can adjust the exposure with the ISO speed while
maintaining the current shutter speed and aperture value.
You can set the ISO speed by holding down <p> (AF area selection)
button and turning the <6> dial (for still photo shooting only). The
settable range is the same as with [ : Set ISO speed (hold btn,
turn )].
: AE lock (hold)
: AE lock, AF stop
: FE lock
: Set ISO speed (hold button, turn )
: Set ISO speed (hold button, turn )
For movie shooting, setting [ : Set ISO speed (hold btn, turn )] or
[ : Set ISO speed (hold btn, turn )] will not take effect.