User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Shooting Video
28
3
Shooting Video and Shooting Functions
Shooting Video
This section explains shooting-related functions. Prepare the lens, power supply and necessary
connections to external devices in advance (A 16, 24, 26). For details on audio output, refer to Audio
Input and Output (A 66).
Before shooting video for the first time, connect an external monitor and microphone to check that
video and audio are being output correctly. Should the camera fail to operate correctly, consult a
Canon Service Center.
1 Set the Q switch to ON.
• The camera turns on and the shooting screen appears.
2 Adjust the video configuration (A 32) and other shooting-related functions, as necessary.
• For details about shooting-related functions, refer to the relevant sections in this chapter.
3Shoot video.
• For details on recording to an external recorder, refer to Connecting to an External Recorder
(A 63).
IMPORTANT
• Be careful not to obstruct in any way the fan’s air vents.
External recorder
External monitor
RC-V100 Remote
Controller (optional)
External microphone
Configuration example
DC power supply