User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Shooting Video
31
Right side of the screen
NOTES
• Press the CANCEL button to stop showing the camera's onscreen displays on the shooting screen;
press the button again to show all onscreen displays again.
• For external monitors that support only 480P or 576P input, connect the camera using the HDMI
OUT teminal.
• When the output signal is 480P or 576P, onscreen displays will not be superimposed on the video
signal.
• Onscreen displays will not be superimposed on the video signal output from the 3G/HD-SDI 2
terminal. To output onscreen displays, use the 3G/HD-SDI 1 / MONITOR terminal or HDMI OUT
terminal.
Display Description Custom Display
Date/time Date and time. [Date/Time]
Gen. Genlock (A 65). –
Rec Recording command being output to an external
recorder (A 63).
–
1/0000 Shutter speed (A 40).
• Grayed out when the camera mode is set to [Av];
not displayed when it is set to [Auto].
[Shutter Speed]
ND Off, ND 1/8, ND 1/64 ND filter setting (A 41).
• Grayed out when the camera mode is set to a
mode other than [Manual] and the ND mode is
set to [Automatic]. Not displayed when the
camera mode is set to [Auto] and the ND mode is
set to [Automatic].
[ND Filter/Infrared]
IR Infrared mode (A 51). [ND Filter/Infrared]