User's Manual

Adjusting the Focus
45
Adjusting the Focus
The camera offers the following ways to focus. The ME200S-SH camera also incorporates Dual Pixel
CMOS AF technology for advanced autofocus performance. See also the general notes at the end of
this section (A 49).
Manual focus: Turn the focus ring on the lens to adjust the focus.
One-shot AF*: With the lens’s focus mode switch set to AF, you will be able to focus manually but still
have the option to press an assignable button set to [One-Shot AF] to let the camera focus automatically
once.
i Continuous AF*: The camera continuously focuses on the subject at the center of the screen.
* Not available when a manual focus lens or a CN20x50 IAS H/E1 lens is attached to the camera.
Focusing methods and required settings
**For the necessary settings on compatible EF Cinema lenses, see the table below.
Required settings on EF Cinema lenses
To adjust the focus from the camera, you will need to change the focus mode using the controls on the
lens. Required settings vary depending on the lens. Refer to the following table and the instruction
manual of the lens used.
Focusing method
Focus mode switch
on an EF lens**
i only:
[Camera Setup] >
[AF Mode] setting
Manual focus
Focus ring MF —
FOCUS dial on an optional RC-V100 Remote
Controller connected to the camera
AF [One Shot]
One-shot AF Assignable button set to [One-Shot AF] AF [One Shot]
i Continuous AF AF
[Continuous
(Always On)],
[Continuous
(Auto Off)]
Lens Part used on the lens
Setting for automatic
adjustment
Setting for manual
adjustment
CN7x17 KAS S/E1
CN20x50 IAS H/E1
Focus operation
change-over knob
SERVO MANU.
CN-E18-80mm T4.4 L IS
KAS S
CN-E70-200mm T4.4 L IS
KAS S
Autofocus/Manual Focus
change-over switch
AF MF