User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Adjusting the Focus
46
Manual Focus
Focus manually using the focus ring on the lens.
1 Set the focus mode switch on the lens to MF.
• On a compatible EF Cinema lens, enable manual
adjustment on the lens (A 45). i only: Also, set the
camera's AF mode to [One Shot] (step 3 in the following
procedure).
2 Turn the lens's focus ring to adjust the focus.
NOTES
• With some EF lenses, you may be able to operate the focus
ring even when the focus mode switch is set to AF.
• When using the optional RC-V100 Remote Controller to adjust
the focus, set the focus mode switch to AF (or the focus
operation change-over knob to SERVO).
• When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the
focus with the remote controller’s FOCUS dial. At default settings, turn the dial right to focus farther
and left to focus nearer. Refer to the instruction manual of the RC-V100 for details on changing that
setting.
• To be able to adjust the focus using an accessory connected to the lens, you will need to change
the [Camera Setup] > [Focus Control] setting to give priority to the lens.
One-Shot AF
With one-shot AF, you will focus manually in most situations but still have the option to press a button
to have the camera focus automatically only one time.
1 Set the focus mode switch on the lens to AF.
• On a compatible EF Cinema lens, enable automatic
adjustment on the lens (A 45).
2 Set an assignable button to [One-Shot AF].
[Other Functions] > [Assignable Buttons] > Desired
button ([1] to [4 (Remote)]) > [One-Shot AF]
3 i Set the AF mode to [One Shot].
[Camera Setup] > [AF Mode] > [One Shot]
4 Press and hold the assignable button.
• While the camera is trying to focus on a subject, [AF] will flash quickly on the left of the screen.
When the correct focus has been achieved, it will stop flashing and stay on.
• When one-shot AF is not available or the camera cannot focus on a subject, [AF] will flash in red
on the screen.
• [AF] will disappear when you release the assignable button.
i only:
[Camera Setup]
[AF Mode]
[One Shot]