User's Manual

Using the Optional RC-V100 Remote Controller
52
Using the Optional RC-V100 Remote Controller
You can connect the optional RC-V100 Remote Controller to control the camera from a distance. In
addition to turning the camera on and off and navigating the menu, you can control various shooting-
related functions, such as aperture, shutter speed, and custom picture settings, like knee and
sharpness. For details on how to connect and use the remote controller, refer to its instruction manual.
Visit your local Canon website to download the latest version.
1Set the Q switch to OFF and connect the remote
controller to the camera.
• Make sure that the remote controller's terminal selection
switch is set to match the terminal to be used on the
camera.
2 Set the Q switch to ON.
• If you are using the RC-V100's REMOTE B terminal,
continue to step 3. Otherwise, you do not need to perform
the rest of the procedure.
3 Open the [RC-V100] submenu.
[Other Functions] > [REMOTE B Term.]
4 Select [RC-V100] and then press SET.
NOTES
• The following controls on the remote controller will not operate the camera: ONSCREEN button,
u (review recording) button, SHUTTER SELECT button, AGC button, AUTO KNEE button, AF
button and AUTO IRIS button.
• The ZOOM dial on the remote controller can operate the camera only when a compatible EF
Cinema lens (A 80) is attached to the camera and the lens's zoom operation change-over knob is
set to SERVO.
RR-10 or RR-100 8-pin
Remote Cable (optional)
To the RC-V100's
REMOTE A terminal
To the RC-V100's
REMOTE B terminal
Remote cable
(supplied with the
RC-V100)
[Other Functions]
[REMOTE B Term.]
[RC-V100]