User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Assignable Buttons
54
4
Customization
Assignable Buttons
The camera offers three assignable buttons to which you can assign various functions. Assign often-
used functions to personalize the camera to your needs and preferences. When an optional RC-V100
Remote Controller is connected to the camera, you can use a fourth assignable button. The names of
the buttons printed on the camera also indicate the buttons' default settings.
Changing the Assigned Function
1 Open the [Assignable Buttons] submenu.
[Other Functions] > [Assignable Buttons]
2 Select the button to change and then press SET.
• A list of available functions appears.
3 Select the desired function and then press SET.
• The selected function will be assigned to the selected
button.
* Assignable button 4 is located on
the optional RC-V100 Remote
Controller but the button's
function can be assigned without
connecting the RC-V100 to the
camera.
[Other Functions]
[Assignable Buttons]
[1 Color Bars]
[2 Set WB]
[3 ABB]
[4 (Remote) Infrared]*