User's Manual

Table Of Contents

Custom Picture Settings

The camera lets you change several settings (A 58) that control various aspects of the image

produced. As a set, all these settings are treated as a single custom picture file. After adjusting the

desired settings to your preference, you can save up to 4 custom picture files in the camera and load

them later to apply exactly the same settings. Alternatively, you can use one of the preset custom

picture files.

NOTES

• Custom picture files are exclusively compatible for use only with other ME20F-SH (j) or

ME200S-SH (i) cameras.

Selecting Custom Picture Files

Select a custom picture file to apply its settings while shooting

or to edit it.

1 Open the custom picture file’s [Select File] screen.

[Custom Picture] > [Select File]

2 Push the joystick up/down to select the desired file

and then press SET.

• Select one of the custom picture files saved in the camera

([CP1] to [CP4], [EOS Std.], [Wide DR], [Canon Log], [Blue Scr], [Green Scr]).

• When you close the menu, the selected custom picture file’s settings will be applied.

Preset Custom Picture Files

The following preset custom picture files are protected and cannot be edited.

[EOS Std.]: Reproduces the image quality and look (vivid, sharp and crisp) of an EOS

digital SLR camera with its picture style set to [Standard].

[Wide DR]: Applies a gamma curve with a very wide dynamic range and an

appropriate color matrix that nevertheless do not require post-production

processing.

[Canon Log]: Uses the Canon Log gamma and color matrix for an outstanding dynamic

range and an image suitable for processing in post-production.

[Blue Scr], [Green Scr]: Settings that optimize the color correction for chroma key systems (blue

screen or green screen, respectively) that use LED lights and retro-

reflective backdrops. They can also be used for chroma key shooting with

common blue or green backdrops.

[Custom Picture]

[Select File]

[Off]