User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Custom Picture Settings
57
NOTES
• About changing custom picture related settings using the optional RC-V100 Remote Controller
- You can press the remote controller’s CUSTOM PICT. button to open the [Custom Picture]
submenu.
- Adjusting custom picture related settings using the remote controller will change the settings
registered under the currently selected custom picture file.
- If a preset custom picture file is selected, custom picture settings cannot be changed using the
remote controller.
• If you set an assignable button to [Custom Picture] (A 54), you can press the button to open the
[Custom Picture] submenu.
Editing a Custom Picture File’s Settings
1 After selecting an editable file ([CP1] to [CP4]), select [Fine Tuning] and then press SET.
2 Select a setting and then press SET.
3 Change the setting to the desired level and then press SET.
• Refer to Available Custom Picture Settings (A 58) for details on the various settings.
• Repeat steps 2 and 3 for other settings, as necessary.
4 Press the MENU button to close the custom picture menu and apply the new custom
picture settings.
Resetting the Current File’s Settings to Default Values
1 After selecting an editable file ([CP1] to [CP4]), open
the [Reset] submenu.
[Fine Tuning] > [Reset]
2 Select the desired default values and then press SET.
• Select [Neutral] to reset to neutral default values
(equivalent to not using custom picture settings at all) or
one of the preset settings ([EOS Std.], [Wide DR], [Canon
Log], [Blue Scr], [Green Scr] or [Linear]*) if you want to
replicate these preset settings, for example as a starting point to edit them further.
* j only.
3 Select [OK] and then press SET.
[Custom Picture]
[Fine Tuning]
[Reset]