User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Custom Picture Settings
59
[Black Gamma]
Raises or lowers the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to
[Wide DR], [Canon Log] or [Linear]*, this setting has no effect on the picture. This setting can be
adjusted from
–50 to 50. (Default: ±0)
* j only.
[Knee]
Controls the upper part of the gamma curve (highlights of the image). By compressing the highlights,
you can prevent parts of the image from being overexposed. When [Gamma] is set to [EOS Std.],
[Wide DR], [Canon Log] or [Linear]*, this setting has no effect on the picture.
[Activate]: Activates/deactivates the setting. (Default: [On])
[Slope]: Determines the slope of the gamma curve above the knee point. This setting can be
adjusted from –35 to 50. (Default: ±0)
[Point]:
Sets the knee point of the gamma curve. This setting can be adjusted from 50 to 109.
(Default: 95)
* j only.
[Sharpness]
Sets the sharpness level. This setting can be adjusted from –10 to 50. (Default: ±0)
Level
Level
Input
Output
Black Gamma
Input
Output
Input
Output
Slope Point