User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Custom Picture Settings
60
[Noise Reduction]
Reduces the amount of noise that appears in the image. Select a level from 1 (lowest level) to 12
(highest level), or select [Off] to turn the noise reduction off. (Default: [Off])
[Chroma Key Corr.]
Corrects the blue or green areas of the image to optimize them for a chroma key production. When
[Gamma] is set to [Linear]* and when [Color Correction] > [Select Area] is an option other than [Off],
this setting has no effect on the picture.
[Color]: Selects whether to correct blue areas or green areas in the image. The available options are
[Off], [Blue] and [Green]. (Default: [Off])
[Hue]: Adjusts the hue for the color to be detected. This setting can be adjusted from 0 to 31.
(Default: 0)
[Chroma]: Adjusts the color saturation for the color to be detected. This setting can be adjusted from
0 to 31. (Default: 0)
[Area]: Adjusts the color range for the color to be detected. This setting can be adjusted from 0 to
2. (Default: 0)
[Y Level]: Adjusts the brightness for the color to be detected. This setting can be adjusted from –15
to 0. (Default: 0)
* j only.
[Color Matrix]
Color matrix affects the color tones throughout the whole image.
[Gain]: Adjusts the color intensity. This setting can be adjusted from -50 to 50. (Default: ±0)
[Phase]: Adjusts the color phase. This setting can be adjusted from -18 to 18. (Default: ±0)
[R-G]: The R-G matrix changes the tint of the picture along the cyan/green and red/magenta
gradations. This setting can be adjusted from -50 to 50. (Default: ±0)
[R-B]: The R-B matrix changes the tint of the picture along the cyan/blue and red/yellow
gradations. This setting can be adjusted from -50 to 50. (Default: ±0)
[G-R]: The G-R matrix changes the tint of the picture along the magenta/red and green/cyan
gradations. This setting can be adjusted from -50 to 50. (Default: ±0)
[G-B]: The G-B matrix changes the tint of the picture along the magenta/blue and green/yellow
gradations. This setting can be adjusted from -50 to 50. (Default: ±0)
[B-R]: The B-R matrix changes the tint of the picture along the yellow/red and blue/cyan
gradations. This setting can be adjusted from -50 to 50. (Default: ±0)
[B-G]: The B-G matrix changes the tint of the picture along the yellow/green and blue/magenta
gradations. This setting can be adjusted from -50 to 50. (Default: ±0)
[White Balance]
Adjusts the amount of white balance throughout the whole image.
[R Gain]: Adjust the intensity of red tones. This setting can be adjusted from –50 to 50. (Default: ±0)
[B Gain]: Adjust the intensity of blue tones. This setting can be adjusted from –50 to 50. (Default: ±0)