User's Manual

Menu Options
68
[Flicker Reduction] [Automatic], [Off]
Allows the camera to automatically detect and correct flicker caused by
artificial light sources.
[Shockless WB] [On], [Off]
When this setting is set to [On], makes the transition look smoother when the
white balance is changed.
[Iris Increment] [1/2 stop], [1/3 stop], [Fine]
Determines the aperture value increment used when adjusting the aperture. When
this setting is set to [Fine], the increments will be smaller than 1/3 stop.
[Zoom-Iris Correct.] [On], [Off]
If you are using a compatible lens*, when this setting is set to [On], the camera
will adjust the aperture as needed to keep the selected aperture value while
zooming. Because of this adjustment, the brightness of the image might
change slightly or you may hear the operation sound. When this setting is set
to [Off], the aperture will close gradually (the image will turn darker) as you
zoom but you will not hear the aperture's operation sound.
* Some EF lenses and EF Cinema lenses are not compatible with this function.
i[AF Mode] [One Shot], [Continuous (Always On)], [Continuous (Auto Off)]
Determines the autofocus mode (A 45).
[One Shot]: The camera focuses automatically one time.
[Continuous (Always On)]: The camera focuses continuously on a subject at the
center of the screen and adjusts the focus automatically.
[Continuous (Auto Off)]: The camera focuses automatically most of the time.
However, when shooting in dark surroundings with the camera mode set to
[Auto], the continuous AF function will be deactivated if the gain value reaches
a predetermined level to prevent unreliable focus operations. When continuous
AF has stopped working, [C. AF] will appear in gray.
This setting has no effect when the camera mode is set to [Manual].
Menu item Submenu / Setting options