User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Menu Options
69
[Focus Limit] [Activate] [On], [Off]
Turns the focus limit on/off (A 47).
[Far] [Set], [Reset], [Cancel]
Allows you to set the far end of the focus limit for the attached lens (A 47).
When a focus limit has not been set, [Limit Off] will appear on the submenu
screen.
[Set]: Saves the current focus position for the far end of the focus limit.
[Reset]: Clears the currently set focus position.
[Cancel]: Cancels the operation.
[Near] [Set], [Reset], [Cancel]
Allows you to set the near end of the focus limit for the attached lens (A 47).
When a focus limit has not been set, [Limit Off] will appear on the submenu
screen.
[Set]: Saves the current focus position for the near end of the focus limit.
[Reset]: Clears the currently set focus position.
[Cancel]: Cancels the operation.
[Focus Control] [Camera], [Lens]
Determines the signal path used to adjust the focus.
[Camera]: Default setting for most cases.
[Lens]: You can adjust the focus using an accessory connected to the lens but
you will not be able to use the camera's autofocus functions or an optional
RC-V100 Remote Controller connected to the camera to adjust the focus.
[Tele-converter] j [4x], [3x], [2x], [Off]; i [8x], [4x], [2x], [Off]
Allows you to digitally increase the focal length of the camera by approximately
the selected factor. Note that the image is digitally processed so the image will
deteriorate throughout the zoom range.
[EF-S Lens] [On], [Off]
When this setting is set to [On], reduces the peripheral illumination fall-off or
vignetting that may occur when using an EF-S lens or EF Cinema lens (j
only) with this camera. However, the image is digitally enlarged by a factor of
approx. 1.55 (j) or 1.04 (i) so the image will deteriorate.
[ABB] [Cancel], [OK]
Starts the procedure to adjust the black balance automatically (A 23).
[Color Bars] [Activate] [On], [Off]
Turns color bars on/off.
[Type] [SMPTE], [ARIB] (when the system frequency is 59.94 Hz)
[EBU], [SMPTE] (when the system frequency is 50.00 Hz)
Selects the type of color bars. The default setting depends on the country/
region of purchase.
[Infrared] [On], [Off]
Turns infrared mode on/off (A 51).
Menu item Submenu / Setting options