User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Introduction
7
1
Introduction
Introduction
Thank you for purchasing the Canon ME20F-SH / ME200S-SH. Please read this manual carefully
before you use the camera and retain it for future reference.
Supplied Accessories
The following accessories are supplied with the camera.
*
Comes pre-attached to the camera.
Conventions Used in this Manual
• IMPORTANT: Precautions related to the camera’s operation.
• NOTES: Additional topics that complement the basic operating procedures.
• A: Reference page number.
• ij : Information that applies, respectively, only to the ME200S-SH or the ME20F-SH
camera.
• The following terms are used in this manual.
“Screen” refers to the screen of an external monitor connected to the camera.
"Shooting screen" refers to the screen in which the shooting image and onscreen displays appear.
Note that onscreen displays will appear only with the video signal output from the camera's
3G/HD-SDI 1 / MONITOR terminal or HDMI OUT terminal, not with the video signal output from the
3G/HD-SDI 2 terminal.
• Some screenshots have been altered to make them easier to read.
• Illustrations in the manual show the Canon ME200S-SH camera with a Canon EF 70-200mm f/2.8L
IS II USM lens or Canon CN7x17 KAS S/E1 lens attached. For simplicity's sake, the lens's tripod
mount is not displayed in the illustrations.
Body Cap
*
Power Connector