User's Manual

Menu Options
70
[Custom Picture] menu
[Audio/Video Setup] menu
[ND Mode] [Automatic], [Manual]
Determines how the ND filter is adjusted when the camera mode is set to a
mode other than [Manual].
[Automatic]: The ND filter is adjusted automatically by the camera.
[Manual]: The ND filter can be adjusted manually (A 41).
[Periph.Illum.Corr.] [On], [Off]
When this setting is set to [On] and the camera has correction data for the
attached lens, it compensates for the darkening of the image's corners
(peripheral illumination drop) due to the lens's characteristics. If correction data
for the lens is not available, the setting will appear grayed out.
Note that depending on the shooting conditions, noise may appear in the
periphery of the image as a result of the correction. Also, the level of correction
will be lower the higher the gain level used.
j To apply the peripheral illumination correction when using an EF-S lens
or EF Cinema lens, be sure to set both this setting and also the [Camera Setup]
> [EF-S Lens] setting to [On].
Menu item Submenu / Setting options
[Select File] [Off], [CP1] to [CP4], [EOS Std.], [Wide DR], [Canon Log], [Blue Scr], [Green Scr]
Selects a custom picture file to apply its settings while shooting or to edit it.
[Fine Tuning] See the detailed explanations on pages 58 to 61.
Menu item Submenu / Setting options
[MIC Power] [On], [Off]
When this setting is set to [On], the camera supplies power to a plug-in power
microphone connected to the MIC terminal (A 66).
IMPORTANT
• Supplying power to a microphone without plug-in power functionality may
damage the microphone.
[1kHz Tone] [-12dB], [-18dB], [-20dB], [Off]
Outputs a 1-kHz audio reference signal from the 3G/HD-SDI terminals and
HDMI OUT terminal.
[3G-SDI Mapping] [Level A], [Level B]
Allows you to select a 3G-SDI mapping level, as defined by the SMPTE ST
425-1 standard, for the video output signal of the 3G/HD-SDI terminals.
Menu item Submenu / Setting options