User's Manual

Menu Options
72
[Power LED] [On], [Off]
Allows you to set whether the Q indicator illuminates while the camera is
on.
[Fan Speed] [Automatic], [High], [Middle], [Low]
Sets the cooling fan's speed. If you select [Automatic], the camera will adjust
the speed of the cooling fan based on the camera's internal temperature.
[System Frequency] [59.94Hz], [50.00Hz]
Sets the camera's system frequency (A 32). The default value depends on
the country/region of purchase.
[Frame Rate (MON.)] [59.94P], [59.94P (i)], [59.94i], [29.97P], [23.98P] (when the system frequency is 59.9 4 Hz)
[50.00P], [50.00P (i)], [50.00i], [25.00P], [25.00PsF] (when the system frequency is
50.00 Hz)
Sets the camera's frame rate (A 32). The default value depends on the
country/region of purchase.
[Resolution] [1920x1080], [1280x720]
Sets the camera's resolution (A 32).
[Genlock Adjustment] [-1023] to [1023] ([000])
Allows you to adjust the H phase of an external Genlock signal (A 65).
[Scan Reverse] [Both], [Vertical], [Horizontal], [Off]
Inverts the image horizontally and/or vertically.
[Aspect Marker] [Activate] [On], [Off]
Turns the onscreen aspect marker on/off (A 50).
[Color] [Black], [Gray], [White]
Determines the color of the aspect marker.
[Ratio] [4:3], [4:3 S35mm] (j only), [1.66:1], [1.85:1], [2.39:1]
Determines the aspect ratio indicated by the aspect marker.
Menu item Submenu / Setting options