User's Manual

Menu Options
73
[Custom Display] [Camera Name] [On], [Off]
[Date/Time] [Date/Time], [Time], [Date], [Off]
i[Continuous AF] [On], [Off]
[White Balance] [On], [Off]
[Camera Mode] [On], [Off]
[Iris] [On], [Off]
[Gain] [On], [Off]
[Shutter Speed] [On], [Off]
[ND Filter/Infrared] [On], [Off]
[Custom Picture] [On], [Off]
[Lens Error] [On], [Off]
[Temperature Warning] [On], [Off]
These settings allow you to customize the shooting screen by turning on/off
individual onscreen displays (A 62). For details about the onscreen displays
that each setting controls, refer to Onscreen Displays (A 29).
[Date/Time]: Allows you display the date and/or time on the shooting screen.
[Camera Name] [ ] (space), [A] to [Z], [a] to [z], numbers, special characters, [Set]
Allows you to enter a name (up to 16 characters) to identify the camera. The
camera name will appear on the screen by default.
Push the joystick up/down to select the desired character and then press SET
to move to the next field. You can press MENU to delete a character. When
finished, select [Set] and then press SET.
[Reset Hour Meter] [Cancel], [OK]
The camera has two “hour meters” – the first keeps track of total operation
time and the second keeps track of operation time since the last time the
second hour meter was reset with this setting.
[Initialize Media] (Used only for firmware updates.)
Initializes the microSD card used when updating the firmware. This menu
option is usually unavailable.
[Firmware] –
You can verify the current version of the camera’s firmware. This menu option is
usually unavailable.
Menu item Submenu / Setting options