User Manual
143
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
11
Import images.
z Click [Import Images from Camera], and
then click [Import Untransferred Images].
z Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
z Click [OK] in the screen that is displayed
after image import is complete.
z Use Digital Photo Professional to view
images you save to a computer. To view
movies, use preinstalled or commonly
available software compatible with
movies recorded by the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
Simply touch a listed device to connect again. You can register
new devices by dragging left or right to access the device
selection screen.
● If you prefer not to display recent target devices, choose MENU
(
=
29) > [ 4] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can also change the camera nickname on the screen in step
2 (
=
158).
● When the camera is connected to a computer, the camera screen
is blank.
● To disconnect from the camera, turn off the camera.
● If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
● Once a connection destination is assigned in Touch Actions
(
=
119), you can automatically reconnect to a previous
destination simply by dragging across the screen with the
assigned gesture.
9
Install a driver (rst Windows
connection only).
z When this screen is displayed on the
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
z Double-click the connected camera icon.
z Driver installation will begin.
z After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
10
Display CameraWindow.
z Windows: Access CameraWindow by
clicking [Downloads Images From Canon
Camera].