User Manual

150
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
4
Send an image.
z Drag images left or right to choose an
image to send, and then touch [Send this
image].
z [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
z To end the connection, touch [
] in
the upper right of the screen, and then
touch [OK] on the conrmation screen.
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the Wi-Fi menu.
You can easily connect again by choosing the device. To add
a new device, drag left or right to access the device selection
screen, and then congure the setting.
● If you prefer not to display recent target devices, choose MENU
(
=
29) > [ 4] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can also send multiple images at once and change the image
size before sending (
=
151).
● Once a connection destination is assigned in Touch Actions
(
=
119), you can automatically reconnect to a previous
destination simply by dragging across the screen with the
assigned gesture.
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send images between them as
follows.
● Only Wi-Fi compatible Canon cameras can be connected via Wi-Fi.
You cannot connect to a Canon camera unless it is Wi-Fi compatible,
even if it supports FlashAir/Eye-Fi cards.
1
Access the Wi-Fi menu.
z Press the [ ] button.
2
Choose [ ].
z Touch [ ].
3
Choose [Add a Device].
z Touch [Add a Device].
z Follow steps 1 – 3 on the target camera
too.
z Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.