User`s guide

Specifying the SNMPv3 Settings
4-31
Customizing Settings
4
3 Select the check box for [Use SNMP v. 3] ➞ click [OK].
NOTE
You can enable both SNMPv1 and SNMPv3 at the same time, depending on your
needs. For more information on settings for SNMPv1, see Chapter 2, “Connecting the
Machine to a TCP/IP Network,” in the System Settings Guide.
4 Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
IMPORTANT
The setting for [Use SNMP v.3] becomes effective after the machine is restarted, while
restarting the machine is not necessary to enable the settings for [User Settings]
(p. 4-31) and [Context Settings] (p. 4-34).
Specifying the User Information for SNMPv3
Specify the user information for SNMPv3 as described below.
1 Click [Add.Func.] ➞ [Settings] in the [Add.Func.] menu.
For help, see the screen shot in step 1 in “Enabling SNMPv3,” on p. 4-30.
The Settings page is displayed.