User`s guide

Specifying the SNMPv3 Settings
4-33
Customizing Settings
4
❑ Click [Register].
The Register User page is displayed.
❑ Specify the necessary information ➞ click [OK].
User Name: Enter the user name (32 alphanumeric characters
maximum).
MIB Access Permission: Select this check box to give read/write permission to the
user.
Security Settings: Select the security setting ([Auth. Yes/Encry. Yes], [Auth.
Yes/Encry. No], or [Auth. No/Encrypt. No]).
If you select [Auth. Yes/Encry. Yes], for example, both
authentication and encryption are enabled.
Authent. Algorithm: Select the algorithm to be used for authentication ([MD5]
or [SHA1]).
Authentication Password: Enter the password for authentication (6 to 16
alphanumeric characters).
Confirm: Enter the password again to confirm it.