User`s guide

Settings Menu
4-17
Customizing Settings
4
Personality
Auto, PCL, PS
This setting enables the machine to process data received from the host computer in the
specified data format. Setting the ‘Personality’ to [Auto] makes the machine determine the
type of data received from the host on a job-by-job basis. If you are printing from applications
on a computer, we recommend that you use the [Auto] setting.
NOTE
If the machine does not correctly switch to the appropriate personality when
‘Personality’ is set to [Auto], change the setting manually to match the data you are
sending from the host computer.
Mode Priority
Off, PCL, PS
This setting determines which personality should be used if a job is received without a
specified command language. ‘Mode Priority’ is available only when ‘Personality’ is set to
[Auto].
Auto Select
PCL: On, Off
PS: On, Off
This setting determines which personality should be used when [Auto] is selected in the
Personality setting.
If [On] is selected in each mode, the mode is available for the Personality setting.
If [Off] is selected in each mode, the mode is not available for the Personality setting.
[Off]: Applies the current Personality setting if the machine cannot detect a
command language.
[PCL]: Assigns priority to the PCL personality.
[PS]: Assigns priority to the PS personality.