User`s guide

PCL Settings
4-22
Customizing Settings
4
Unit of Measure
Millimeters, Inches
This setting enables you to specify the unit of measurement to use to specify the custom
paper size.
IMPORTANT
This setting is available for PCL5 printing only. PCL6 printing is not supported.
NOTE
This function is available if [On] is selected in the Custom Paper setting.
X dimension
140.0 to 630.0 mm; 356.0
This setting enables you to specify the horizontal size of the custom paper.
This function is useful when part of the printed image is cut off. Increasing this value may
allow some of the missing text to be correctly printed. Make sure not to increase the value
beyond the actual size of the paper you are using for printing.
IMPORTANT
This setting is available for PCL5 printing only. PCL6 printing is not supported.
NOTE
• This function is available if [On] is selected in the Custom Paper setting.
• Holding down [ ] or [ ] makes the values change faster.
Y dimension
99.0 to 216.0 mm; 216.0
This setting enables you to specify the vertical size of the custom paper.
This function is useful when part of the printed image is cut off, increasing this value may
allow some of the missing text to be correctly printed. Make sure you do not increase the
value beyond the actual size of the paper you are using for printing.
IMPORTANT
This setting is available for PCL5 printing only. PCL6 printing is not supported.