User Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Basic Operations
- Printing a Document
- Can Be Used Conveniently with a Mobile Device
- Network
- Security
- Using Remote UI
- Setting Menu List
- Troubleshooting (FAQ)
- Maintenance
- Appendix
- SIL OPEN FONT LICENSE
Setting a Wait Time for Connecting to a Network
52AC-02L
When a network is designed to enjoy r
edundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to dene the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Press
( ).
2
Use / to select <Network>, and press .
● When a message appears, press .
3
Select <Wait Time at Startup>, and press .
4
Enter the wait time in seconds, and press
.
● Use the numeric k
e
ys to enter the time.
5
Perform a hard reset.
Performing a Hard Reset(P. 466)
➠ The settings are enabled after the har
d reset is performed.
LINKS
Conguring Ethernet Settings(P. 178
)
Network
180