User Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Basic Operations
- Printing a Document
- Can Be Used Conveniently with a Mobile Device
- Network
- Security
- Using Remote UI
- Setting Menu List
- Troubleshooting (FAQ)
- Maintenance
- Appendix
- SIL OPEN FONT LICENSE
Network
52AC-04L
All the settings about the network are listed with short descriptions. Default settings
are mark
ed with a dagger (
).
If <Network> is not displayed
● If <Network> under <Interface Selection> is set to <Off>, <Network> is not displayed in the Setup menu.
Interface Selection(P. 371)
Asterisks (
*
)
● Settings mark
ed with an asterisk (
*
) may not be displayed depending on the options you ar
e using, or other
setting items.
TCP/IP Settings(P. 331)
Mopria(P. 342)
Google Cloud Print(P. 343)
SMB(P. 343)
SNMP Settings(P. 344)
Spooler(P. 345)
Receive in Parallel(P. 346)
Wait Time at Startup(P. 346)
Remote UI Settings(P. 346)
Software Regist/Updt(P. 347)
Ethernet Driver(P. 347)
Sleep Mode Priority(P. 348)
IEEE802.1X(P. 348)
Address Filter(P. 349)
MAC Address(P. 349)
E-Mail Print Set.(P. 349)
Monitoring Service(P. 350)
Init. Network Set.(P. 351)
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP addr
ess settings.
IPv4 Settings
Specify settings for using the machine in an IPv4 network.
IPv4
Enable or disable IPv4 in the machine.
Off
On
( ) <Network> Check the message <TCP/IP Settings> <IPv4
Settings> <IPv4> <Off> or <On> Perform a hard reset ( Performing a
Hard Reset(P
. 466) )
Setting Menu List
331