User Manual

Loading a Custom Size Paper
To load custom size paper or other paper whose size is not found in the paper size markings on the paper drawer, use
the following procedure.
1
Pull out the paper drawer until it stops.
2
Slide the paper guides apart.
● Press the lock release lever to slide the paper guides outward.
3
Load the paper so that the edge of the paper stack is aligned against the right side of
the paper drawer.
● Place the paper stack with the print side face up.
● Fan the paper stack well, and tap it on a at surface to align the edges.
Do not exceed the load limit line when loading paper
● Mak
e
sure that the paper stack does not exceed the load limit line (
). Loading too much paper can
cause paper jams.
Basic Operations
45